24/7 emergencies 814 777 6921812 230 6079WhatsApp 811 786 0768
Electrónica MonterreyElectrónica MonterreyLaboratorios Creativeit Talk to an engineer
Menu

What Does the IEC 61169 RF Connector Series Cover?

The IEC 61169 series brings together international specifications for radio-frequency coaxial connectors: a generic part with definitions and test methods, and specific parts for each connector family.

General scope

An RF connector does more than join two cables: it is part of the transmission line and must maintain its characteristic impedance, minimize reflections and preserve the shielding. The IEC 61169 series establishes a normative framework for specifying these connectors uniformly across manufacturers and countries.

How it is organized

  • Generic part: terms, general requirements, test conditions and measurement methods applicable to the whole family.
  • Family or interface specifications: each type of coaxial connector has its own part, with the dimensions of the mating interface and the specific requirements.
  • Detail or quality specifications: these define performance levels and tests for particular connector versions.

What kinds of requirements are defined

  • Mechanical dimensions of the interface, which allow connectors from different manufacturers to mate correctly.
  • Electrical characteristics: impedance, return loss or standing wave ratio, contact resistance, insulation, shielding leakage.
  • Mechanical and environmental characteristics: mating durability, cable retention, resistance to vibration and temperature.
  • Test and inspection methods.

What an engineer sees

In practice, the series appears in datasheets and purchasing requirements when a connector is requested as “compliant” with a specific part. It also serves as a reference for understanding why two seemingly similar connectors are not interchangeable: differences of millimeters in the center pin or the thread cause damage or poor reflection performance.

Common mistakes

  • Mixing families with similar coupling but different impedance or dimensions.
  • Assuming that a connector compliant with a family maintains its performance at any frequency; the upper limit of use depends on each type and its quality.
  • Ignoring wear: repeated mating degrades repeatability, especially in laboratory measurements.
  • Tightening without a suitable torque wrench, which damages the interface.
  • Confusing the compliance of the connector with that of the cable-and-connector assembly, which is affected by how it is assembled.

How to consult it

This guide describes only the general scope. For exact requirements, classifications and methods, consult the current part and edition of the series.

We do real tests, on video! Watch them on our YouTube channel →

Do you have a problem nobody has been able to measure?

Talk directly to the engineer in charge, with no middlemen.

Talk to an engineer