The IEEE 80 guide is a design reference for AC substation grounding systems. Its central focus is the safety of people: it seeks to ensure that, during a fault, the potential differences to which an individual may be subjected stay below tolerable limits.
What topics it addresses
- Effects of current on the human body: the basis for the tolerable voltage limits.
- Tolerance criteria: permissible step and touch voltages, and the influence of the surface layer and fault duration.
- Design data: soil resistivity, fault current and the fraction of it that flows into the ground.
- Conductor selection: thermal and mechanical criteria for conductor size and joints.
- Calculation: grid resistance, ground potential rise, and maximum mesh and step voltages.
- Design procedure: an iterative process of verification and adjustment.
- Practical considerations: connections, transferred voltages and field verification.
What it is used for in practice
It provides a recognized methodology for demonstrating that a grid is safe. Designers use the guide to link the input data (terrain, fault current, clearing times) with the results that matter: are the touch and step voltages below the tolerable limit?
What it is not
It does not replace local electrical installation requirements or the engineer’s judgment: the simplified methods assume soil and geometries under certain assumptions, and outside them more detailed analysis is advisable. Nor does it cover all types of installations on its own; other guides cover industrial grounding or measurement.
How to consult it
Criteria, equations and limits change between editions, so it is recommended to always consult the current edition and confirm with the project which one applies. The design and testing of substation ground grids must be done by qualified personnel, in accordance with safety regulations.