General scope
The guide deals with insulation resistance testing with DC voltage on the windings of rotating electrical machines, such as motors and generators. It defines the purpose of the test, the factors that influence the result and an orderly way of interpreting it. It is a recommendation, not a regulation: its value lies in providing a common language and method between those who measure and those who decide.
What topics it addresses
- What insulation resistance physically represents and why it depends on time.
- Preparation of the machine: de-energized, disconnected, with windings discharged.
- Selection of the test voltage according to the winding class.
- Temperature correction for comparing measurements.
- The polarization index and its interpretation.
- Criteria for evaluating whether the measured value is acceptable for operating or starting a machine.
- Factors that distort the reading: moisture, surface contamination, type of insulation.
Why it should be read carefully
Modern and older insulation do not behave alike: an aged system can give results very different from a modern one in the same state of health. For this reason the guide warns that the criteria depend on the type of insulation and that the trend over time is more informative than an isolated reading.
How it is used in practice
A technician measures, records the temperature, corrects, calculates the index and compares it against the guide’s criterion and against the historical results of that same machine. If the reading is low, the next step is to investigate: clean, dry and repeat, rather than concluding immediately that the winding is damaged.
What it does not cover
- It does not replace other insulation tests, such as power factor, partial discharge or overvoltage tests, which reveal different defects.
- It is not a safety procedure and does not authorize work on energized equipment.
- It does not cover transformers or cables, which have their own practices.
Common errors
- Applying a criterion from the guide to a type of insulation to which it does not correspond.
- Omitting temperature correction when comparing.
- Treating an acceptable value as proof that the insulation is healthy in all respects.
- Citing the guide without consulting the current edition to confirm values and conditions.
Tests with high DC voltage must be performed by qualified personnel and in accordance with the applicable safety regulations.