What is backed up and for how long
The first decision is the load to protect and the required autonomy. Batteries do not sustain a plant for hours; they cover the time needed to continue a critical process, perform an orderly shutdown or let a generator start. Bank capacity is calculated from the power, the discharge time and the expected aging of the cells.
System components
- Battery bank: lead-acid (vented or valve-regulated), nickel-cadmium or lithium-ion, with different characteristics in terms of life, maintenance and thermal behavior.
- Charger or rectifier: maintains the charge and feeds the DC load.
- Inverter: in a UPS, converts direct current to alternating current for AC loads.
- Static and maintenance bypass: feed the load from the utility supply when the equipment is unavailable or undergoing maintenance.
Engineering points
Direct current is harder to interrupt than alternating current, because it does not pass through zero. Fuses and breakers must be specified for direct current, with suitable voltage and interrupting capacity. A battery contributes a large short-circuit current, so protection and coordination are calculated for that case.
The grounding type of the DC system, ground-fault detection and bank monitoring are part of the design. The UPS is also coordinated with the backup source: the rectifier’s input current and harmonics affect the behavior of a generator.
Environment and space
Lead-acid batteries release hydrogen while charging, so the room needs ventilation according to the design. Temperature directly influences life: running hotter reduces durability. Space is required for access, spill containment in the case of cells with liquid electrolyte, and racks with adequate structural strength.
What the engineer sees in operation
Charger failure, ground fault or low battery alarms, capacity test results and per-cell voltage records. Capacity is verified with discharge tests, because float voltage does not prove that the bank will deliver the expected energy.
Batteries contain energy that is always available, even with the system turned off. Their installation and maintenance must be carried out by qualified persons, with the applicable safety measures and regulations.