24/7 emergencies 814 777 6921812 230 6079WhatsApp 811 786 0768
Electrónica MonterreyElectrónica MonterreyLaboratorios Creativeit Talk to an engineer
Menu

What power quality does a data center require?

A data center needs a supply that keeps the voltage within the tolerance of the computing equipment at all times, with continuous backup, redundancy, and control of harmonics and grounding.

What the computing load needs

Servers and network equipment use switched-mode power supplies, which rectify the input voltage and store energy in capacitors. These supplies tolerate voltage variations and very brief interruptions, but not a prolonged outage. Voltage-versus-time tolerance curves, such as those used for information technology equipment, describe this capability graphically. The essential requirement is continuity: power cannot be interrupted for longer than that load can withstand.

How it is achieved

  • UPS: isolates the load from grid sags, interruptions, and overvoltages while the batteries or energy storage sustain the load and a generator set starts.
  • Redundancy: multiple supply paths and standby equipment so that maintenance or a failure does not stop the service.
  • Transfer: generator starting and switching must be coordinated with the UPS to avoid transients and synchronization problems.

What problems appear in practice

Server power supplies generate currents with high harmonic content. Added up across thousands of units, they can heat transformers and cables, distort the voltage, and, in three-phase systems with neutral, produce third-harmonic currents that add in the neutral conductor. An undersized neutral is a known risk in this type of installation.

UPS units with a rectifier input can also feed distortion back to the grid and react badly to a low-capacity generator. That is why compatibility between UPS and generator is studied.

Grounding and noise

A well-designed, equipotential ground reference reduces common-mode noise and the ground loops that damage electronic equipment or make it behave erratically. Surge protection systems are coordinated in several stages starting from the service entrance.

How to verify it

Voltage, current, harmonics, power factor, and events are recorded at several levels of the supply chain, with the load in different operating regimes. Comparing the UPS input and output shows what it is filtering and what it is generating. Specific criteria are taken from the design specifications and the applicable standards currently in force, not from general rules. Work on these systems, which include batteries and energized buses, is for qualified personnel.

We do real tests, on video! Watch them on our YouTube channel →

Do you have a problem nobody has been able to measure?

Talk directly to the engineer in charge, with no middlemen.

Talk to an engineer