Start with the application
A multifunction meter brings together in one device what used to require several instruments. There is no single list of requirements: it depends on whether it will be used to allocate costs, monitor demand, detect power quality problems or integrate into a supervisory system. These are the features worth reviewing.
Measured quantities
- Voltage and current per phase, true RMS values.
- Active, reactive and apparent power, and power factor, with an indication of which definition is used.
- Active and reactive energy, with logging in both directions if there is generation or regeneration.
- Demand per interval, with a configurable window and logging of the maximum.
- Frequency and, depending on the model, harmonic distortion and unbalance.
Accuracy
Check the accuracy class for energy and for each quantity, which applies to the set of meter, current transformers and voltage transformers. The meter’s accuracy is of no use if the CT is of a worse class or is used outside its range.
Connection and configuration
The device must support the topology of the installation: three-wire, four-wire, connection with or without voltage transformers, and it must allow the transformation ratios to be set. An incorrect configuration produces readings that look consistent but are wrong.
Logging and communications
The memory and the logging interval determine how much history is kept. To integrate it into a supervisory system, the available communication protocols must be reviewed, along with time synchronization, which is essential for correlating data between points. Threshold alarms are useful for warning of high demand or low power factor.
What to check first
Before comparing models, define the question (billing, quality, supervision), the electrical topology and the available sensors. A power quality meter with events and harmonics is a different category from an energy-only meter. Installation and connection in energized panels are work for qualified personnel.