What we calibrate
We perform calibrations in the field or in the laboratory on dielectric equipment: hot sticks, aerial buckets, sleeves, gloves, blankets and rope.
Work on energized power lines requires tools designed and manufactured specifically for high voltage, which have passed field tests and the tests specified by safety standards.
We are the only ones in the country able to include videos and photographic evidence in our reports, for greater customer assurance.
Why inspect hot sticks
With time and use, it is advisable to carry out routine inspections of the mechanical behavior of hot sticks, along with electrical tests, because the lives of the operators depend on them.
Mechanical check
Check that there are no cracks or deformations from the stresses of constant use.
Electrical condition
Electrical condition is not easy to diagnose. Even if the hot stick looks fine to the naked eye, moisture may have seeped in or there may be impurities or dirt on its surface, and that is a potential risk to users.
We perform tests dry and on a wet surface, as established in OSHA standards.
Portable test equipment
There is portable, easy-to-use equipment that makes it possible to test hot stick insulation without being in a specialized workshop or laboratory, as required by ASTM F711 and IEC 60855-1.
- Metal frame, with fiberglass side covers.
- Metal current-sensing electrode.
- Wooden cover and handle for easy transport.
- Hipot tests from 70kV wet up to 100kV dry.
Chance LT10A
We carry portable instruments such as the Chance LT10A. Its display has green and red areas to indicate the result for the item under test:
- Green: OK, with leakage of less than 20 microamperes.
- Red: not OK, with leakage greater than 20 microamperes.
It also includes a calibration hot stick, in case you want to verify the instrument’s reading.
Surface maintenance
If constant use leaves hot sticks with scratches, scrapes or surface defects, there are kits for making the necessary repairs, materials for keeping surfaces clean and glossy, and silicone-impregnated cloths. These prevent dirt and moisture from building up on hot sticks and putting operators at risk.
Laboratory experience
We have been doing laboratory testing for several decades, with a commitment to the lives and safety of operators on electrical transmission and distribution lines. You can find your equipment at Análisis Eléctricos Monterrey.
For more information about our equipment, you can call, send a WhatsApp message to 8117860768 or write to us by email.
Leakage current table per ASTM F711

