We have professional Rogowski probes available for immediate delivery. A Rogowski probe measures alternating currents (AC) non-intrusively: it neither interrupts the circuit nor touches the conductor. It works by electromagnetic induction.
What is a Rogowski probe used for?
- Measuring high currents: it is used in industrial installations or equipment with very large currents, where other measurement methods could be dangerous or difficult to apply.
- Accurate AC measurement: it works for low- and high-frequency currents without altering the circuit.
- Electrical system monitoring: it is used in energy meters, protection and control systems, and power quality analysis.
- Measurement without interruptions: it has no solid magnetic core and encircles the conductor, so it is placed around the cable without disconnecting anything. This is more convenient and safer in industrial environments.
- Research and diagnostics: it is used in laboratories and in electrical equipment testing because of its high accuracy and its ability to measure currents continuously.
Advantages of Rogowski probes
- Non-invasive: it does not require disconnecting the circuit or modifying the installation.
- High accuracy: it measures currents accurately, even under high-frequency conditions.
- Flexibility: it adapts to a wide range of conductor sizes and to hard-to-reach places.
Specifications
| Model | RCP500 |
| Bandwidth | (-3dB) |
| Range | 200mApk-500Apk |
| Output connector | Powered BNC/external BNC |
| Output sensitivity | 10mV/A |
| Typical accuracy | 1% |
| Phase accuracy | (45Hz-66Hz) |
| Temperature coefficient | temperature range + 0.05 × accuracy specifications /℃ (23℃±5℃) |
| Conductor position accuracy | Within ±1% (deviation from center) |
| Influence of external magnetic fields | 1.5% fs or less (400 A/m, 50 Hz/60 Hz) |
| Withstand voltage | ±1mV or less |
| Maximum voltage | AC 10 kV RMS (1 minute), (50 Hz/60 Hz) (Rogowski coil only) |
| Output impedance | High resistance |
| Output noise | <2mv rms |
| Maximum conductor diameter | ≤Φ50mm |
| Power supply | DC 5V |
| Cable length from coil to integrator | 2m |
| Dimensions | 37*22*82mm |
| Rogowski coil inner diameter | 50 mm |
| Rogowski coil thickness | Ø6mm |
| Environmental characteristics | |
| Operating temperature | -20-70℃ |
| Storage temperature | -30℃-70℃ |
| Operating humidity | Max 80%, non-condensing |
| Operating altitude | ≤2000 m |
| Operating environment | Indoor use, grade 2. |
