24/7 emergencies 814 777 6921812 230 6079WhatsApp 811 786 0768
Electrónica MonterreyElectrónica MonterreyLaboratorios Creativeit Talk to an engineer
Menu

Vector signal analyzer tutorial (transmitter tester)

A short video in which we measure the ACPR and OBW of a digitally modulated signal with a vector signal analyzer (VSA).

About the video

In this short video we use a VSA, or vector signal analyzer, to measure the ACPR (adjacent channel power ratio) and OBW (occupied bandwidth) of a digitally modulated signal.

Watch the tutorial video on YouTube

What a vector signal analyzer is

The vector signal analyzer (VSA) is an instrument for measuring electronic signals, usually radio frequency (RF). It replaces the spectrum analyzer (SA) as the measuring instrument for designers working on these systems. It is ideal for measuring fast, wideband or spread-spectrum signals.

The VSA can perform many of the measurement and characterization tasks of the SA, plus useful digital demodulation functions.

Differences between SA and VSA

The SA and the VSA operate in different ways. If these differences are not taken into account when measuring, they can produce measurement errors.

A vector instrument with a real bandwidth equal to or greater than that of the transmitter ensures that all signals of interest from the device under analysis are captured.

Vector instruments are more expensive than scalar ones, but they offer faster measurement and allow more complex signal analysis and generation.

We do real tests, on video! Watch them on our YouTube channel →

Do you have a problem nobody has been able to measure?

Talk directly to the engineer in charge, with no middlemen.

Talk to an engineer