Temperature control for immersion and fluid circulation testing
The Neslab RTE-111 Refrigerated Bath/Circulator is a thermal control system for laboratory work, research, development and engineering testing that holds a fluid at a controlled temperature. Unlike an environmental chamber, where the sample is exposed to air, the RTE-111 works with a fluid bath and allows samples, components or devices to be immersed during a thermal test. It can also circulate the fluid to an external system.
Temperature range
The RTE-111 operates from approximately −25 °C to +150 °C, for tests that require controlled cooling and heating. Specified temperature stability is up to ±0.01 °C, depending on the operating conditions and the fluid used.
It is used to study the behavior of materials, electronic components and other devices at different temperatures within a controlled liquid medium.
Fluid bath for immersion testing
The work area measures approximately 4.75 × 8 × 6 inches (12.1 × 20.3 × 15.3 cm) and the bath capacity is approximately 1.9 gallons (7 liters). You can place a sample or component in the thermal fluid and subject it to a defined temperature. Immersion gives more direct and uniform thermal contact than a test in air alone.
Cooling and heating
The system has air-cooled mechanical refrigeration and a built-in heater. Specified cooling capacity is 500 W at 20 °C, equivalent to approximately 1,705 BTU/h. The heater is 800 W for 60 Hz models. The unit extracts heat from the fluid when cooling is required and uses the heater to raise its temperature.
Fluid circulation
The built-in pump circulates the fluid within the system or sends it to an external application. Specified pumping capacity reaches approximately 15 L/min at zero head, and decreases as head or circuit restriction increases. This is why the RTE-111 serves as an immersion bath and as a circulation system for applications with heat transfer through an external circuit.
Applications
- Thermal testing of electronic components.
- Immersion testing in temperature-controlled fluids.
- Thermal characterization of materials.
- Evaluation of electronic devices at different temperatures.
- Product research and development.
- Laboratory testing and prototype validation.
- Thermal control of experimental processes.
- Cooling of equipment and instruments by fluid circulation.
- Heat transfer applications.
- Tests where the sample must be in a controlled liquid environment.
Main specifications
| Feature | Neslab RTE-111 |
|---|---|
| Type | Refrigerated Bath/Circulator |
| Temperature range | −25 °C to +150 °C |
| Stability | ±0.01 °C |
| Cooling capacity | 500 W / 1,705 BTU/h |
| Pumping capacity | Up to 15 L/min |
| Heater | 800 W, 60 Hz |
| Bath capacity | Approx. 7 L |
| Work area | Approx. 12.1 × 20.3 × 15.3 cm |
| Refrigerant | R134a |
| Power supply | 115 V, 60 Hz / 220 V, 50 Hz |
The stated capacities depend on the operating conditions, the ambient temperature and the fluid used. The manufacturer’s documentation specifies the conditions for the stability and cooling capacity figures.
Neslab RTE-111 rental in Monterrey
Renting is an alternative for laboratories, engineering companies, research centers and manufacturers that need to carry out temporary thermal tests by immersion or circulation of a controlled fluid, without buying a temperature control system.
If you need to know how a sample or component behaves at a specific temperature, talk to the engineer to determine whether the capacity of the RTE-111 is suitable for your test and which thermal fluid you can use for the required temperature range.
